Brief Introduction

PUN-H-4X0,75-SW

Outside diameter4 mm Flow-relevant bending radius16 mm Inside diameter2.6 mm Min. bending radius8 mm Instructions on useTPE-U Ether based Tubing characteristicsSuitable for energy chains Operating pressure complete temperature range-0.095 MPa ... 0.6 MPa Operating pressure complete temperature range-0.95 bar ... 6 bar Operating pressure complete temperature range-13.775 psi ... 87 psi Temperature-dependent operating pressure-0.095 MPa ... 1 MPa Temperature-dependent operating pressure-0.95 bar ... 10 bar Temperature-dependent operating pressure-13.775 psi ... 145 psi Note on operating pressureWater: temperature-dependent operating pressure, see diagram, max. 0.3 MPa at 0 - 60 °C ApprovalGerman Technical Control Board (TÜV) Certificate issuing authorityB 013277 0506 00 Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) Fire test materialUL94 HB LABS (PWIS) conformityVDMA24364-B2-L Suitability for the production of Li-ion batteriesSuitable for battery production according to the Festo internal definition of the degree of severity F1A with restrictions regarding the use of Cu/Zn/Ni Cleanroom classElement installed statically, no meaningful evaluation possible according to ISO 14644-1 Suitable for use with foodSee supplementary material information Ambient temperature-35 °C ... 60 °C Product weight according to length0.0085 kg/m Pneumatic connectionFor push-in connector O.D. 4 mm For barbed fitting I.D. 3 mm with union nut ColourBlack Shore hardnessD 52 +/-3 Note on materialsRoHS-compliant Material tubingTPE-U(PU)